Vwalla Eco Wood Panels are designed to be assembled by you.
That way, you save the most money. Check out the easy installation steps below!
- Vwalla Eco Wood Panels
- Wood Varnish
- Paint Roller (For Varnish Application)
STEP 1 : SURFACE PREPARATION
Vwalla Eco Wood Panels are made for relatively flat and smooth surfaces. Ensure that the surface is clean, dry and free of loose debris before installation.
STEP 2 : DESIGN PLANNING
You will need to map out the design/pattern you would like to use. The possibilities are endless, but it is helpful to plan out the design ahead of time.
STEP 3 : INSTALLATION PLANNING & MEASUREMENTS
Use a leveler, measuring tape or ruler to mark the walls with guidelines to ensure proper positioning and planning.
STEP 4 : ADHERING ONTO WALL
Begin peeling the adhesives and installing the Eco Wood Panels onto your wall. To compensate for wood expansion and contraction, leave a 1mm gap in between each Eco Wood Panel during installation.
For ceiling application, we recommend applying additional industrial-grade glue in between the adhesives.
STEP 5 : TRIMMING WOOD PANEL
You will most likely be required to cut the wood panels. Use a standard pen knife to cut, and sand the cut edges for a smooth finishing.
STEP 6 : APPLY VARNISH FINISHING
Apply wood varnish using a paint roller for a smooth and protective finish.
That's it! Ditch mediocre walls for designs of superior quality. Browse our range of Eco Wood Panels today!